Features 2 operational modes: 4×4 matrix (seamless switch) and video wall
Supports HDMI input/output with UHD resolutions up to 4K @ 30 Hz (4:4:4)
Can upscale or downscale output resolutions to 720p/1080p/1920 x 1200/4K @ 30 Hz
Allows flexible control via front-panel buttons, remote or RS-232 commands
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Features
Extends 4K Video from 4 HDMI Sources to 4 HDMI Monitors or HDTVs The B119-4X4-4K-VWL is a 4×4 seamless matrix switch that can also be used as a video wall processor. In switch mode, it can display any of the four HDMI inputs on any of the four HDMI output displays at 4K resolution. In video wall mode, it divides one display across two to four devices at 1080p resolution, creating a super-display of multiple screens. It is ideal for video wall applications in retail settings, concert venues, restaurants and bars, hotels, offices, houses of worship and other applications where large, visually appealing displays are needed.
2 Operational Modes: 4×4 Matrix and Video Wall This Matrix Switch features four 4K/30 Hz HDMI inputs and four HDMI outputs to create 10 unique video wall splicing modes: 2×2, 2×1, 2×1-2, 1×2, 1×2-2, 3×1, 4×1, 1×3, 1×4 and matrix. Output resolutions can be upscaled or downscaled to 720p, 1080p, 1920 x 1200 or 4K/30 Hz. Seamless video switching ensures no delay or picture loss during transitions. You can set display modes via front-panel buttons, the included remote or RS-232 commands.
Transmits 4K Video with 4:4:4 Color The B119-4X4-4K-VWL supports Ultra HD 4K resolutions at 30 Hz with LPCM, Dolby Digital/Plus and DTS audio. HDCP 1.4 encryption allows you to stream 4K content with no loss in resolution. This switch also supports uncompressed 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.
Plug-and-Play Operation for Quick Setup and Immediate Use The unit works right out of the box with no software required. Mounting hardware is included for installing the unit on a wall or other flat surface. Connect up to four 4K source devices to the HDMI inputs and up to four 4K displays to the HDMI outputs with user-supplied cables. The external power supply comes with four international plug adapters to ensure an AC connection anywhere.
TAA-Compliant for GSA Schedule Purchases The B119-4X4-4K-VWL is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
System Requirements
Source device(s) with HDMI output (media server, Blu-ray player, laptop, cable/satellite box, gaming console)
Display device(s) with HDMI input (HDTV, monitor, projector)
All connected devices and cabling must support 4K to achieve 4K resolution
Package Includes
HDMI Matrix Switch
Remote control
3-pin RS-232 Phoenix connector
External power supply (Input: 100–240V, 50/60 Hz, 0.4A; Output: 12V 1A) with 4 ft. (1.2 m) cord
(4) International plug adapters (AS/NZS 3112 Australia, BS 1363 UK, CEE 7/7 Schuko, NEMA 1-15P North America)
Supported resolutions include: 4096 x 2160p @ 30Hz, 3840 x 2160p @ 30Hz, 1920 x 1200p @ 60Hz,1920 x 1080p @ 60Hz, 1920 x 1080p @ 50Hz, 1600 x 1200p @60Hz, 1600 x 900p @ 60Hz,1440 x 900p @ 60Hz, 1360 x 768p @ 60Hz, 1280 x 1024p @ 60Hz, 1280 x 720p @ 60Hz,1280 x 720p @ 50Hz, 1024 x 768p @ 60Hz When used as a matrix switch the maximum supported video output is 4K @ 30 Hz When used as a video wall controller the maximum supported video output is 1080p @ 60 Hz
POWER LED: ILLUMINATES GREEN WHEN THE SWITCH IS OPERATIONAL AND RED WHEN IN STANDBY; SIGNAL SOURCE LED: EACH OUTPUT 1-4, ILLUMINTES GREEN WHEN ITS INPUT PORT IS SELECTED
Be the first to review “Tripp Lite series 4×4 HDMI Matrix Switch with Video Wall Controller – 4K 30 Hz, 4 HDMI Inputs, 4 HDMI Outputs, 4:4:4, TAA”Cancel Reply
IN STOCK
IN STOCK
Reviews
There are no reviews yet.